The dashboard melted but we still have the radio

The Build

Finally swapped out dashboards in the s13. Bought a uncracked dash off Craigslist’s back in 2014 before I even had the car ha. Yesterday decided to just do it, turned out to not be as difficult as I perceived. I’ve been slacking on getting shit done to it so I guess this helps get the ball rolling? Thanks to Dylan for coming thru and talking story while I did all the work lol nah he helped me angle in the new dash.

new used dash

Even riveted my vin plate to the new dash so I was stoked.

thanks for stopping by

Advertisements

Kaaz 2 way differential installed´╗┐

The Build

Bought a used 2 way from my friend that I worked with back at Nissan. Installed it at after work. Side job saturdays!

It came out of his s14 so I had to put my s13 cover on. And the s14 cover went on my open diff so he could prolly get it welded later on.

Forgot to take a pic of the cover before I spent like a hour scraping off the old gasket and cleaning it with the parts washer.

Casey in the back doing his brakes on his g35 and I don’t know what Bryson’s doing lol

But yeah I did this January 21 2017 so it’s been about a year late that I’m posting this lol. It’s in though and does sick cookers!

Thanks for reading<3

Turn signal lever replacement S13

The Build

My headlights wouldn’t flip down so I bought this from the dealership I work at. Looked online and read that the leads/contact points on these things get burnt out or corroded or something that doesn’t make a good connection anymore. I was unsure if replacing this would fix it but luckily it did.

Heres the part number if anyone needs it.


Pretty simple to install. Just remove the steering column trim and then it’s just one plug and a couple screws (forgot how many there were) holding it in.

Lol look at the difference compared to the wiper lever.


Thanks for reading!

Chase Bays Power Steering Line install S13

The Build

So I finally fixed my power steering leak!      It went out my last summer in 2015 and I just never bothered to fix it. The leak was coming from the high pressure line that connected to the rack and the pump.

               Here’s a half ass side by side comparison:

But yeah had the opportunity to do it at work which made it heaps easier since the car is on lift. My friend Casey was nice enough to stay back to help out and keep me company.




So I removed the intercooler piping and whatever else was in the way.

Sorry for the lack of detailed pictures.


When I routed it like the pic of above it was kinking and the inlet pipe wouldn’t be able to fit. So Casey suggested we just flip it over:


It’s not really pretty but it works lol, I should’ve invested in Chase Bays swivel fittings..


But yeah I have power steering again!! So that’s good, next I hope I can put my LSD in soon!

Note* I noticed fluid seaping a little from the rack ;( Not sure if it’s leaking from the chase bays line or the oem line that we unbolted for clearance to tighten the new line. If it’s the chase bays one Teflon tape! LOL or if it’s the oem one then I guess I’ll have to buy another o-ring. I’ll update this post when I figure it out. 

Update* Got it sorted out and put some pumblers tape around the threads of the AN fitting that goes into the rack.

Thank you again for reading!!